ROPEX RES-403 Resistron:

RES-403 | In-stock USA

The ROPEX Resistron RES-403 controller utilizes microprocessor technology for sensorless, closed-loop control of impulse heating elements. The ROPEX RES-403 is designed for simple plug-in system integration.

The ROPEX Resistron RES-403 contains the following features:

ROPEX RES-403 Features:

• µC-Technology

• Automatic zero calibration, push button (AUTOCAL)

• Automatic optimization (AUTOTUNE)

• Automatic frequency adjustment

• Large current and voltage range

• Alarm function with fault diagnostics

• Selectable temperature range (0...300°C, 0...500°C)

• Temperature set point selection with (PD) potentiometer

• 0...10 VDC analog output for ACTUAL temperature

• Temperature display using (ATR) temperature meter

• Activated with contact or 24 VDC signal

• Automatic configuration of secondary voltage and current ranges
  (AUTORANGE, as of October 2005)

• Automatic phase angle compensation (AUTOCOMP, as of October 2005)

• Selectable heatseal band alloy (A20 (Alloy-20), A20L, Low-Ex)




RES-403 Operating Instructions:




For additional downloads, please visit ropex-group.com ... or click here to add Ropex tab

ROPEX RES-403 Resistron Part Numbers:

Part numbers for 115, 230 and 400 VAC units

• RES-403/115VAC Part No. 740301

• RES-403/230VAC Part No. 740302

• RES-403/400VAC Part No. 740303

• Alternate industry names for RES-403 controllers:

• RES-403, RES403, RES_403, res-403, res403, res_403

Upgrades:

• The RES 200 series has been replaced by the newer RES 400 series with micro-processor technology. The RES-403 replaces the now obsolete RES-203.

• Alternate industry names for RES-203 controllers:

• RES-203, RES203, RES_203, res-203, res203, res_203



RES-203 Upgrade Instructions:

ROPEX Accessories:

... available for the Ropex Resistron Heatseal Controllers:

• Current transformer: PEX-W5

• Current transformer high busbar: HCB-1

• Line filter: LF-06480, LF-35480, LF-10520, LF-20520, LF-30520, LF50520

• Booster: B-075480, B100480

• Temperature display, temperature meter: ATR-3, ATR-5

• Temperature adjustment, potentiometer : PD-3, PD-5

• Heatseal power transformer: PTR, TR-x

• Supervising fault current transformer: MSW

• Communication interface: CI-USB-1

• Temperature Sensor: TS-1

• Twisted Cable (RES voltage measurement cable): UML-1

• High Current Cable (RES current load cables): C-TC