Force Global Impulse Heat Sealing Technologies and Solutons
RES DIN-rail
Mount Controllers
RES Panel Mount Controllers
RES/CIRUS
Controller Accessories
Panel Mount Controller Accessories
Validation + Verification
Tools
RES Background

Heat Seal Bar-A with Bar-Insul Insulation Backing:

Bar (A)
Step by Step Consumables Assembly Guide.
Bill of Materials:
Force Global Heat Seal Bar A1. Ropex Bar Components.

Step #1
Clean jaw bar surface, remove old tape residue and ensure jaw bar surface is clean and smooth.
Note ... bar preparation is a key step in the creation of a perfect heat seal.

Bar width = 19.0 mm (0.75")
Force Global Heat Seal Bar A2. Ropex Bar Components.
Step #2
Apply Bar-Insul jaw bar insulation.
Part No. 100724
Bar-Insul 350 Insulation
12.0 mm (Width) x 1.0 mm
(Thickness) x 1500 mm (Length)
Adhesive Backed
Force Global Heat Seal Bar A3. Ropex Bar Components.
Step #3
Apply PTFE tape over the Bar-Insul jaw bar insulation. This will prolong the insulation life, and enable the heat seal band to freely expand and contract.
Part No. 102305
PTFE TAPE
AP-15, Roll = 30 m
15.0 mm (Width) x 0.15 mm
(Thickness) x 30 m (Length)
Adhesive Backed
Force Global Heat Seal Bar A4. Ropex Bar Components.
Step #4
Install heat seal band.
-
Force Global Heat Seal Bar A5. Ropex Bar Components.
Step #5
Apply PTFE Cover Strip, the adhesive free zone will enable the heat seal band to freely expand and contract.
Part No. 101501
PTFE Cover-Strip
AP-08-CS, Roll = 30 m
45.0 mm (Width) x 0.08 mm
(Thickness) x 30 m (Length)
Adhesive Backed
Force Global Heat Seal Bar A6. Ropex Bar Components.
Step #6
Optional ... apply masking tape to PTFE Cover-Strip sides to aid with adhesion.
-

This information is provided as a guide to illustrate some of the various heat seal bar configurations that are possible with components and consumables Force Global offer.
This web page is the property of Force Global LLC and may not be reproduced in whole or part, nor used for any purpose without the written consent of Force Global LLC.

Contact


P: 414 507-9378
F: 262 628-4451

e-mail: info@forceglobal.com

Jaw Bar Insulation
PTFE Fabric Tapes
Heatseal Bands/Wires
Heatseal Components
Jaw Bar Combinations
Tips and Tutorials
Graphics
Links